Sword Care and Maintenance

Instructions for Sword Care and Maintenance

Stainless steel, thought by many to be invulnerable to corrosion, is not blemish proof. With stainless steel, one must be more cautious because of the evidence of corrosion does not show itself as quickly as it does on carbon spring steel. If the blade is touched with a finger and merely wiped off with a soft rag, that finger print will be permanently etched into the steel forever! In time, the print will become more and more visible and pronounced.

To prevent this from happening. Keep Fingers Off the Blade! In fact, keep the blade away from any bare skin as skin is very acidic. It is this acid that will eat away at the metal and the only way to stop it is by giving the blade a thorough cleaning.

All metal parts of your sword, including the wire wrapped handles, should always be covered with a light coating of oil to prevent rust. Apply a light coat of oil or a silicone spray. You can also wipe it with a silicone coated gun/reel cloth. In many respects, the gun/reel cloth is preferred as there is less tendency for dust to accumulate and trap oxygen to cause pitted areas in the blade. Instead of applying WD-40 to the blade, you may choose to use a good metal polish periodically.

Do not swing any edged weapon carelessly. Remember, this is a real weapon and must be treated with the same respect you would give a loaded firearm. When you wish to experience how it feels for warriors to wield these weapons in battle, make sure you are well out of reach of anyone. These weapons are very heavy and could slip out of your hands. Be careful not to endanger yourself or others when you manipulate these swords

Leather scabbards and sheaths as well as leather covered handles should be treated with a good paste wax. The scabbard can also be treated with neatsfoot or mink oil for waterproofing, although this is not recommended for gripping surfaces. Do not store your sword in its scabbard for long periods of time since the leather traps moisture which can produce rust spots on the blade.

Leave a Reply

Your email address will not be published. Required fields are marked *